• From: Nederland
  • Registered: 2007-04-08
  • Posts: 10

Topic: fiberspar r6000 520 IMCS 34 in a TR2

Hi Barry,

How does a fiberspar R6000 520 IMCS 34 perform in a TR2 10.5 or newer TRx.

The curve shoud be rightt (stiff top) but for a MS not 34 but 32 is recommended what would be the influance of this?

Thanks Andres

  • From: The Netherlands
  • Registered: 2006-07-11
  • Posts: 138

Re: fiberspar r6000 520 IMCS 34 in a TR2

I have had used the fiberspar 6000 in a tr-3 it did not work.
The rotation of the cambers was not good. Did not work.

NO Wind No Waves  No Future
  • Registered: 2007-07-26
  • Posts: 17

Re: fiberspar r6000 520 IMCS 34 in a TR2

Hi Ambaas.

I have used fibarspar 6000 in TR 2  7.0  6.3 and  5.9  all work well with this mast.

TR3 do not work with this mast as it is too soft in the in the bottm. I would assume the 6000 would work Ok on the 10.5  TR2 .  Not TR3s OR LATER.

Hope this helps

  • From: Nederland
  • Registered: 2007-04-08
  • Posts: 10

Re: fiberspar r6000 520 IMCS 34 in a TR2

Thanks, i now use this mast in a Gaastra Nitro 4 10.5 (recommended sail and mast). It works great, but i don't like the feeling of the Nitro 4. So i hope a TR2 feels better (more power forward and low).

Andres